![]()
NEWARK, DE – November 17, 2026 – PRESSADVANTAGE –
East Coast Epoxy, LLC announces the availability of its concrete repair and floor restoration services for residential and business properties in Newark and surrounding Delaware communities. The services are part of the company’s existing offering, which also includes epoxy coatings, polyaspartic coatings, polished concrete, and concrete staining..
The company’s concrete-restoration information identifies cracks, uneven surfaces, pitting, and spalling among the conditions its services address. Pitting refers to small cavities in a concrete surface; spalling describes areas where concrete chips or flakes away. Deciding how to address these conditions depends on the concrete’s condition and the requirements of the flooring system planned for it.
.png/:/rs=w:282,h:148,cg:true,m/cr=w:282,h:148/qt=q:95)
Floor restoration involves more than choosing a color or applying a coating. The concrete underneath—called the substrate—must be evaluated before work proceeds. Preparation Guides explain that concrete should be sound and that weak or deteriorated material must be removed before its resin-based flooring systems are installed. In practical terms, the finished floor needs a suitable foundation beneath it.
The International Concrete Repair Institute addresses this work in Technical Guideline No. 310.2R-2013, Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repair. The publication describes preparation methods, their operating requirements, and their limitations. It also provides benchmark surface profiles: reference textures used to describe and check the prepared concrete surface.
These references help explain why preparation is a separate stage from finishing. They identify grinding and shot blasting as mechanical preparation methods. Both work on the concrete surface to prepare it for the selected flooring system; the appropriate method depends on the project and product requirements.
Cleaning addresses another issue. Dirt, oil, grease, chemicals, and curing compounds—materials used during concrete curing—can interfere with how a coating bonds to concrete. Guidance distinguishes removing those contaminants from creating the required surface texture. A surface can therefore require both cleaning and mechanical preparation before installation.
A customer account supplied for this announcement describes a garage-floor installation and cleanup after completion. East Coast Epoxy Google Review by Will Cisneros wrote:
“Did an amazing job on my garage floor! I’m a contractor and I’m always looking at quality …top notch! Once job was completed they cleaned up and not a trace of them being there …HIGHLY recommended. Thank you!”
The statement reflects Cisneros’ reported experience and personal assessment. His identification of himself as a contractor is part of the testimonial, not an independently verified credential.
Using strict industry standards, East Coast Epoxy considers moisture inside concrete before flooring installation. ASTM F2170, Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes, describes how probes placed within a slab measure its internal relative humidity. This provides information about moisture conditions inside the concrete, rather than relying only on how dry the surface appears.
ASTM identifies excessive slab moisture as a potential contributor to flooring failures, including debonding—when flooring or a coating separates from the surface beneath it—and deterioration of finishes and coatings. However, a test result describes conditions only at the locations tested and at the time of testing. It is not a permanent guarantee of the slab’s condition.
The selected flooring manufacturer’s instructions provide the requirements for determining whether its system can be installed under the measured conditions. Moisture testing, surface cleaning, and mechanical preparation address important considerations.
East Coast Epoxy, LLC is located at 38 Albe Drive, Suite 6, Newark, Delaware. Information about its concrete repair, restoration, and floor-coating services is available at https://get-epoxy.com. East Coast Epoxy’s existing Newark services include concrete repair and floor restoration. Industry guidance explains why sound concrete, surface preparation, and moisture evaluation matter before coatings are installed.
###
For more information about East Coast Epoxy, contact the company here:
East Coast Epoxy
Anthony Chambers
610 220-8153
Anthony@get-epoxy.com
East Coast Epoxy
38 Albe Dr #6,
Newark, DE 19702
610 220-8153
Anthony@get-epoxy.com